3000GT / Stealth EVOSPEC Drive By Wire Pedal Adapter



By submitting your payment, you agree to our terms and conditions.


Here is an adapter bracket made for the 3KGT – GTO – Stealth platform to allow you to use the Evo X DBW accelerator pedal for a bolt on DBW setup. This bracket puts the Evo X pedal in the factory location. The bracket is also adjustable (left to right) to also give the end user a little bit of adjustability to fit your needs. We chose the Evo X pedal because they are cheap, very available, and offer good resolution over some other DBW pedals. Each bracket setup will INCLUDE all titanium hardware to bolt the bracket to the firewall and the pedal to the bracket. Also an optional choice Evo X DBW pedal connector with pins and seal AND Bosch DBW throttle body connector.

OEM Mitsubishi DBW pedal is available with limited supply (When selecting the OEM Mitsubishi DBW pedal if it is shown as an option, it is in stock. If it is not shown in options it is not in stock. These are good used pedals from the EvoX or Ralliart.)

Available in Raw and Anodized finish.

Some benefits to going DBW

  • Deletes the factory throttle cable cleaning up the engine bay
  • Eliminates the need for a Idle Air Control Valve
  • Improved Driveability when using larger sized Throttle Bodies.
  • Easier Part-Throttle tuning for a smoother part throttle response while driving
  • ECU controlled Launch control
  • REV-MATCHED tuning Downshifts and No-lift upshift shifting.
  • Traction Control assistance using throttle position.
  • Cruise Control and Valet mode for safety.


Known ECU’s that support DBW :

Elite 1500
Elite 2000
Elite 2500
Nexus R5

Infinity – 6
Infinity – 8
Infinity -8H

Fuel Tech
FT 550 lite
FT 550
FT 600

G4X Extreme X
G4X Fury X
G4X Plug in X
G4+ Force GDI
G4+ Thunder

ALL M1 Series

Pro 70
Pro 112
Pro 128

EMU – Black
EMU – Classic


NOTE: This does NOT work with Stock, Flash, Chrome ECU nor AEM Series 1 and Series 2 ECUs


Bosch DBW Throttle body.
Note the 68mm TB mounting holes need to be drilled out for M8 sized bolts.
The 82mm TB will require a adapter flange or a intake manifold flanged for this TB.
These will require the Bosch connector which you can choose in the connector drop down window.

Bosch DBW TB
. 68MM TB
PN 0280750156
. 82MM TB PN

OEM Mitsubishi DBW options.
Note these are a direct bolt on to your EVO, DSM, and 3000GT OEM intake manifolds. Make sure you port match your manifold to the TB if needed. These will require the Mitsubishi connector which you can choose in the connector drop down window

2005 / 2012 Eclipse GT 68mm DBW TB

60mm The 4g eclipse NON gt 2.4L, 04-06 Lancer Ralliart, 05-06 4cyl Outlander, 05 – 12 Galant (4 cyl)

The bosch throttle bodies are sometimes on backorder, for stock status on those contact us.

Additional information

Weight2 lbs
Dimensions11 × 7 × 2 in

91-99;Mitsubishi;3000GT;VR4, 91-99;Mitsubishi;3000GT;SL, 91-96;Mitsubishi;3000GT;BASE, 91-96;Dodge;Stealth;RT Turbo, 91-96;Dodge;Stealth;RT


There are no reviews yet

Add a review
You must be logged in to post a review Log In

You may also like…

  • Haltech Elite 2500 Premium Universal 8FT Wire-In Harness ECU Kit



    Select options