Fabtech 2019 Ford Ranger 4WD 3.5in Ball Joint UCA System w/Rear DL 2.25 Shocks & Intrusion Beam Kit

$1,691.91

-

This quality 2019 Ford Ranger Upper Control Arm system is perfect for owners looking to increase ride height to run slightly larger tires than factory. The system will provide additional wheel travel with no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock like ride. Fabtech’s Upper Control Arms address the geometry of the front suspension with the new ride height for proper align ability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Included in this system is Fabtech’s Offset Intrusion Beam Kit that allows use of 33″ tires. The factory Intrusion Beams are located in the front fenderwells, forward and back of the tire. They limit the size of the tire you can install while being an integral part of the front collision safety impact feature of the vehicle. Rather than modifying or removing the Beams for tire clearance, Fabtech provides replacement Offset Intrusion Beams. They are constructed of 1/4″ thick steel and are a welded box design for maximum strength. They allow full steer with 33/1250R tires w/ a 5″ back space wheel. Rear lift comes from 1.5″ blocks and u-bolts.
3.5in. BJ UCA SYS W/2.25DLSS 2019 FORD RANGER 4WD W/INTRUSION BEAM KIT
TIRE SIZE – 33/12.50R18 WHEEL – 18X9 W/5″ BS W/MINOR TRIMMING; TIRE SIZE – 33/12.50R20 WHEEL – 20X9 W/5″ BS W/MINOR TRIMMING; 47. FITS SUPERCREW ONLY.

Not In Stock, or ships from manufacturer, please contact for ETA

By submitting your payment, you agree to our terms and conditions.

SKU: fabK2323DL Category:

Description

This quality 2019 Ford Ranger Upper Control Arm system is perfect for owners looking to increase ride height to run slightly larger tires than factory. The system will provide additional wheel travel with no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock like ride. Fabtech’s Upper Control Arms address the geometry of the front suspension with the new ride height for proper align ability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Included in this system is Fabtech’s Offset Intrusion Beam Kit that allows use of 33″ tires. The factory Intrusion Beams are located in the front fenderwells, forward and back of the tire. They limit the size of the tire you can install while being an integral part of the front collision safety impact feature of the vehicle. Rather than modifying or removing the Beams for tire clearance, Fabtech provides replacement Offset Intrusion Beams. They are constructed of 1/4″ thick steel and are a welded box design for maximum strength. They allow full steer with 33/1250R tires w/ a 5″ back space wheel. Rear lift comes from 1.5″ blocks and u-bolts.
3.5in. BJ UCA SYS W/2.25DLSS 2019 FORD RANGER 4WD W/INTRUSION BEAM KIT
TIRE SIZE – 33/12.50R18 WHEEL – 18X9 W/5″ BS W/MINOR TRIMMING; TIRE SIZE – 33/12.50R20 WHEEL – 20X9 W/5″ BS W/MINOR TRIMMING; 47. FITS SUPERCREW ONLY.

Fitment:
Ford Ranger Lariat 2019
Ford Ranger XL 2019
Ford Ranger XLT 2019

Additional information

air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Y

epa

N/A

brand

Fabtech

Reviews

There are no reviews yet.

Be the first to review “Fabtech 2019 Ford Ranger 4WD 3.5in Ball Joint UCA System w/Rear DL 2.25 Shocks & Intrusion Beam Kit”

Related products