Sale!

EBC 98-03 Toyota Sienna 3.0 Greenstuff Front Brake Pads

$129.29

-

An excellent solution for 4×4 use, this heavy duty Greenstuff formulation has slightly lower friction than its 2000 series counterpart (average friction coefficient 0.45mm) but has the benefit of longer life and better resistance to offroad conditions of dust and sand etc. It has an extremely low rotor wear factor and medium-to-good lifetime.
Upgrade your stopping power with EBC High Friction 6000 series Greenstuff brake pads. The new EBC 6000 series boasts GG rated friction for better stopping with fully shimmed edge chamfered and slotted construction for silent running.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
98 thru 2003 TOYOTA Sienna 3.0

Out of stock

SKU: ebcDP6874 Category:

Description

An excellent solution for 4×4 use, this heavy duty Greenstuff formulation has slightly lower friction than its 2000 series counterpart (average friction coefficient 0.45mm) but has the benefit of longer life and better resistance to offroad conditions of dust and sand etc. It has an extremely low rotor wear factor and medium-to-good lifetime.
Upgrade your stopping power with EBC High Friction 6000 series Greenstuff brake pads. The new EBC 6000 series boasts GG rated friction for better stopping with fully shimmed edge chamfered and slotted construction for silent running.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
98 thru 2003 TOYOTA Sienna 3.0

Additional information

Weight4 lbs
Dimensions3.7 × 3.6 × 3.6 in
air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

N

epa

N/A

upc

840655019879

brand

EBC