BMR 64-66 A-Body Rear Lowering Springs – Red

$139.95

-

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.
These springs will lower the rear of your 1964-1966 GM A-body, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Lowers the Rear of your 1964-1966 GM A-body 1-inch;Variable 125-200 lb/in spring rate;Improves handling and ride quality;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Made in the U.S.A.

Out of stock

SKU: bmrSP017R Category:

Description

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.
These springs will lower the rear of your 1964-1966 GM A-body, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Lowers the Rear of your 1964-1966 GM A-body 1-inch;Variable 125-200 lb/in spring rate;Improves handling and ride quality;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Made in the U.S.A.

Fitment:
Buick Gran Sport Base 1965
Buick Gran Sport Base 1966
Buick Skylark Base 1964
Buick Skylark Base 1965
Buick Skylark Base 1966
Chevrolet Chevelle Base 1964
Chevrolet Chevelle Base 1965
Chevrolet Chevelle Base 1966
Chevrolet Chevelle Deluxe 1965
Chevrolet Chevelle Deluxe 1966
Chevrolet Chevelle SS 1964
Chevrolet Chevelle SS 1965
Chevrolet Chevelle SS 1966
Chevrolet El Camino Base 1964
Chevrolet El Camino Base 1965
Chevrolet El Camino Base 1966
Chevrolet Malibu Base 1964
Chevrolet Malibu Base 1965
Chevrolet Malibu Base 1966
Oldsmobile 442 Base 1964
Oldsmobile 442 Base 1965
Oldsmobile 442 Base 1966
Oldsmobile Cutlass Base 1964
Oldsmobile Cutlass Base 1965
Oldsmobile Cutlass Base 1966
Oldsmobile Cutlass Holiday 1964
Oldsmobile Cutlass Holiday 1965
Oldsmobile Cutlass Holiday 1966
Pontiac GTO Base 1964
Pontiac GTO Base 1965
Pontiac GTO Base 1966
Pontiac LeMans Base 1964
Pontiac LeMans Base 1965
Pontiac LeMans Base 1966

Additional information

Weight15 lbs
Dimensions15 × 15 × 8 in
air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Unknown

epa

N/A

brand

BMR Suspension

Reviews

There are no reviews yet.

Be the first to review “BMR 64-66 A-Body Rear Lowering Springs – Red”