BMR 16-17 6th Gen Camaro Rear Hollow 32mm Non-Adj. Sway Bar Kit – Red

$209.95

-

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB051 rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 1.25-inch DOM steel tubing, the SB051 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the front bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers The SB051 attaches to your Sixth Gen Camaro with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.
BMR Suspension designed the SB051 sway bar kit for street performance, autocross, and road race applications.
Fits 2016-Newer Chevrolet Camaro(excluding cars with ELSD);Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;52% increase in sway bar rate over stock sway bar;Cold formed to better resist torsional fatigue;Manufactured from 1.25-inch heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Out of stock

SKU: bmrSB051R Category:

Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB051 rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 1.25-inch DOM steel tubing, the SB051 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the front bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers The SB051 attaches to your Sixth Gen Camaro with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.
BMR Suspension designed the SB051 sway bar kit for street performance, autocross, and road race applications.
Fits 2016-Newer Chevrolet Camaro(excluding cars with ELSD);Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;52% increase in sway bar rate over stock sway bar;Cold formed to better resist torsional fatigue;Manufactured from 1.25-inch heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
Chevrolet Camaro LS 2018
Chevrolet Camaro LS 2019
Chevrolet Camaro LS 2020
Chevrolet Camaro LT 2016
Chevrolet Camaro LT 2017
Chevrolet Camaro LT 2018
Chevrolet Camaro LT 2019
Chevrolet Camaro LT 2020
Chevrolet Camaro SS 2016
Chevrolet Camaro SS 2017
Chevrolet Camaro SS 2018
Chevrolet Camaro SS 2019
Chevrolet Camaro SS 2020
Chevrolet Camaro ZL1 2017
Chevrolet Camaro ZL1 2018
Chevrolet Camaro ZL1 2019
Chevrolet Camaro ZL1 2020

Additional information

Weight15 lbs
Dimensions56 × 17 × 5 in
air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Unknown

epa

N/A

brand

BMR Suspension

Reviews

There are no reviews yet.

Be the first to review “BMR 16-17 6th Gen Camaro Rear Hollow 32mm Non-Adj. Sway Bar Kit – Red”

Related products