BMR 15-17 S550 Mustang Front & Rear Sway Bar Kit w/ Bushings – Red

$379.95

-

BMR Suspension’s SB043 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 35mm (front) and 25mm (rear)DOM steel tubing, the SB043 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality.Thrust washers are welded to the front bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers The SB043 attaches to your S550 Mustang with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. BMR Suspension designed the SB043 sway bar kit for street performance, autocross, and road race applications. The large adjustable sway bars’ three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bars. The SB043 front sway bar gives you a 28%-70% increase in sway bar rate, and the rear bar gives you a 63%-208% increase in rate over the stock bar. These rate increases and adjustability allow you to fine-tune the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB043 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, which equals better handling.
The large adjustable sway bars’ three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bars.
Front Sway Bar;Fits all S550 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;28%-70% increase in sway bar rate ;Cold formed to better resist torsional fatigue;Manufactured from 35mm heavy-wall DOM tubing for increased strength;Three-way adjustable for street and track use ;Adjustability allows for fine-tuning of suspension;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Billet aluminum, black anodized bushings saddles;Durable powdercoat finish;1-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.;;Rear Sway Bar;Fits S550 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;63%-208% increase is sway bar rate over stock sway bar ;Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-duty bar stock for increased strength;Three-way adjustable design;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

9 in stock

By submitting your payment, you agree to our terms and conditions.

SKU: bmrSB043R Category:

Description

BMR Suspension’s SB043 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 35mm (front) and 25mm (rear)DOM steel tubing, the SB043 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality.Thrust washers are welded to the front bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers The SB043 attaches to your S550 Mustang with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. BMR Suspension designed the SB043 sway bar kit for street performance, autocross, and road race applications. The large adjustable sway bars’ three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bars. The SB043 front sway bar gives you a 28%-70% increase in sway bar rate, and the rear bar gives you a 63%-208% increase in rate over the stock bar. These rate increases and adjustability allow you to fine-tune the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB043 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, which equals better handling.
The large adjustable sway bars’ three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bars.
Front Sway Bar;Fits all S550 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;28%-70% increase in sway bar rate ;Cold formed to better resist torsional fatigue;Manufactured from 35mm heavy-wall DOM tubing for increased strength;Three-way adjustable for street and track use ;Adjustability allows for fine-tuning of suspension;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Billet aluminum, black anodized bushings saddles;Durable powdercoat finish;1-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.;;Rear Sway Bar;Fits S550 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;63%-208% increase is sway bar rate over stock sway bar ;Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-duty bar stock for increased strength;Three-way adjustable design;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
Ford Mustang Bullitt 2019
Ford Mustang Bullitt 2020
Ford Mustang EcoBoost 2015
Ford Mustang EcoBoost 2016
Ford Mustang EcoBoost 2017
Ford Mustang EcoBoost 2018
Ford Mustang EcoBoost 2019
Ford Mustang EcoBoost 2020
Ford Mustang EcoBoost Premium 2015
Ford Mustang EcoBoost Premium 2016
Ford Mustang EcoBoost Premium 2017
Ford Mustang EcoBoost Premium 2018
Ford Mustang EcoBoost Premium 2019
Ford Mustang EcoBoost Premium 2020
Ford Mustang GT 2015
Ford Mustang GT 2016
Ford Mustang GT 2017
Ford Mustang GT 2018
Ford Mustang GT 2019
Ford Mustang GT 2020
Ford Mustang GT 50 Years Limited Edition 2015
Ford Mustang GT Premium 2015
Ford Mustang GT Premium 2016
Ford Mustang GT Premium 2017
Ford Mustang GT Premium 2018
Ford Mustang GT Premium 2019
Ford Mustang GT Premium 2020
Ford Mustang Shelby GT350 2015
Ford Mustang Shelby GT350 2016
Ford Mustang Shelby GT350 2017
Ford Mustang Shelby GT350 2018
Ford Mustang Shelby GT350 2019
Ford Mustang Shelby GT350 2020
Ford Mustang Shelby GT350R 2016
Ford Mustang Shelby GT350R 2017
Ford Mustang Shelby GT350R 2018
Ford Mustang Shelby GT350R 2019
Ford Mustang Shelby GT350R 2020
Ford Mustang Shelby GT500 2020
Ford Mustang V6 2015
Ford Mustang V6 2016
Ford Mustang V6 2017

Additional information

Weight33.5 lbs
Dimensions53.9 × 16.2 × 5.2 in
air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Unknown

epa

N/A

brand

BMR Suspension

Reviews

There are no reviews yet.

Be the first to review “BMR 15-17 S550 Mustang Front & Rear Sway Bar Kit w/ Bushings – Red”

Related products