BMR 15-17 S550 Mustang Front Hollow 35mm 3-Hole Adj. Sway Bar Kit – Black Hammertone

$219.95

-

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB044 S550 Mustang front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm DOM tubing, the SB044 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 95-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The billet aluminum sway bar mounting brackets minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
BMR Suspension designed the SB044 sway bar kit for street performance, autocross, and road race applications.
Fits all S550 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;19%-55% increase in sway bar rate;Cold formed to better resist torsional fatigue;Manufactured from 35mm heavy-wall DOM tubing for increased strength;Three-way adjustable for street and track use ;Adjustability allows for fine-tuning of suspension;95-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Billet aluminum, black anodized bushings saddles;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Out of stock

SKU: bmrSB044H Category:

Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB044 S550 Mustang front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm DOM tubing, the SB044 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 95-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The billet aluminum sway bar mounting brackets minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
BMR Suspension designed the SB044 sway bar kit for street performance, autocross, and road race applications.
Fits all S550 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;19%-55% increase in sway bar rate;Cold formed to better resist torsional fatigue;Manufactured from 35mm heavy-wall DOM tubing for increased strength;Three-way adjustable for street and track use ;Adjustability allows for fine-tuning of suspension;95-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Billet aluminum, black anodized bushings saddles;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
Ford Mustang Bullitt 2019
Ford Mustang Bullitt 2020
Ford Mustang EcoBoost 2015
Ford Mustang EcoBoost 2016
Ford Mustang EcoBoost 2017
Ford Mustang EcoBoost 2018
Ford Mustang EcoBoost 2019
Ford Mustang EcoBoost 2020
Ford Mustang EcoBoost Premium 2015
Ford Mustang EcoBoost Premium 2016
Ford Mustang EcoBoost Premium 2017
Ford Mustang EcoBoost Premium 2018
Ford Mustang EcoBoost Premium 2019
Ford Mustang EcoBoost Premium 2020
Ford Mustang GT 2015
Ford Mustang GT 2016
Ford Mustang GT 2017
Ford Mustang GT 2018
Ford Mustang GT 2019
Ford Mustang GT 2020
Ford Mustang GT 50 Years Limited Edition 2015
Ford Mustang GT Premium 2015
Ford Mustang GT Premium 2016
Ford Mustang GT Premium 2017
Ford Mustang GT Premium 2018
Ford Mustang GT Premium 2019
Ford Mustang GT Premium 2020
Ford Mustang Shelby GT350 2015
Ford Mustang Shelby GT350 2016
Ford Mustang Shelby GT350 2017
Ford Mustang Shelby GT350 2018
Ford Mustang Shelby GT350 2019
Ford Mustang Shelby GT350 2020
Ford Mustang Shelby GT350R 2016
Ford Mustang Shelby GT350R 2017
Ford Mustang Shelby GT350R 2018
Ford Mustang Shelby GT350R 2019
Ford Mustang Shelby GT350R 2020
Ford Mustang Shelby GT500 2020
Ford Mustang V6 2015
Ford Mustang V6 2016
Ford Mustang V6 2017

Additional information

Weight21.4 lbs
Dimensions54.9 × 16.7 × 4.8 in
air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Unknown

epa

N/A

brand

BMR Suspension

Reviews

There are no reviews yet.

Be the first to review “BMR 15-17 S550 Mustang Front Hollow 35mm 3-Hole Adj. Sway Bar Kit – Black Hammertone”

Related products