BMR 11-14 S197 Mustang Rear Hollow 25mm Adj. Sway Bar Kit w/ Bushings – Red

$399.95

-

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB042 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB042 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB042 attaches to your Mustang with fabricated end links and 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection. The sway bar is 4-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
BMR Suspension designed the SB042 sway bar kit for street performance, autocross, and road race applications.
Fits all S197 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;16%-270% increase is sway bar rate over stock sway bar (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-wall DOM tubing for increased strength;Four-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;Fabricated sway bar end links;High-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Out of stock

SKU: bmrSB042R Category:

Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB042 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB042 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB042 attaches to your Mustang with fabricated end links and 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection. The sway bar is 4-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
BMR Suspension designed the SB042 sway bar kit for street performance, autocross, and road race applications.
Fits all S197 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;16%-270% increase is sway bar rate over stock sway bar (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-wall DOM tubing for increased strength;Four-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;Fabricated sway bar end links;High-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
Ford Mustang Base 2005
Ford Mustang Base 2006
Ford Mustang Base 2007
Ford Mustang Base 2008
Ford Mustang Base 2009
Ford Mustang Base 2010
Ford Mustang Base 2011
Ford Mustang Base 2012
Ford Mustang Base 2013
Ford Mustang Base 2014
Ford Mustang Boss 302 2012
Ford Mustang Boss 302 2013
Ford Mustang Bullitt 2008
Ford Mustang Bullitt 2009
Ford Mustang GT 2005
Ford Mustang GT 2006
Ford Mustang GT 2007
Ford Mustang GT 2008
Ford Mustang GT 2009
Ford Mustang GT 2010
Ford Mustang GT 2011
Ford Mustang GT 2012
Ford Mustang GT 2013
Ford Mustang GT 2014
Ford Mustang Shelby GT 2007
Ford Mustang Shelby GT 2008
Ford Mustang Shelby GT500 2007
Ford Mustang Shelby GT500 2008
Ford Mustang Shelby GT500 2009
Ford Mustang Shelby GT500 2010
Ford Mustang Shelby GT500 2011
Ford Mustang Shelby GT500 2012
Ford Mustang Shelby GT500 2013
Ford Mustang Shelby GT500 2014
Ford Mustang Shelby GT500KR 2008
Ford Mustang Shelby GT500KR 2009

Additional information

Weight23.2 lbs
Dimensions47.4 × 13.6 × 5.4 in
air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Unknown

epa

N/A

brand

BMR Suspension

Reviews

There are no reviews yet.

Be the first to review “BMR 11-14 S197 Mustang Rear Hollow 25mm Adj. Sway Bar Kit w/ Bushings – Red”

Related products