SPC Performance SPC Tools - 32115

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off-center" or clocked position. The 32115 is for Ford F450/550 Super Duty. These tools slide directly over thewheel studs in the 12, 4, and 8 o'clock positions. The wheel is then installed over the tools, the stud nuts are added to the exposed studs and tightened. The wheel is now centered precisely. The centering tools are then removed and the final stud nuts are added - torquing all nuts to mfg. specifications. California Residents WARNING

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off-center" or clocked position. The 32115 is for Ford F450/550 Super Duty. These tools slide directly over thewheel studs in the 12, 4, and 8 o'clock positions. The wheel is then installed over the tools, the stud nuts are added to the exposed studs and tightened. The wheel is now centered precisely. The centering tools are then removed and the final stud nuts are added - torquing all nuts to mfg. specifications.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

SPC 32115 14MM WHEEL CENTERING TOOLS

SPC Performance WHEEL CENTERING

FORD WHEEL CENTERING TOOLS

Wheel Alignment Tool

CENTERING TOOLS

HD SLEEVE SE

HD CNTR TL