Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to knuckle. Simply determine what degree offset sleeve is already in the knuckle and replace it with a new offset. Jeeps coming off the line right now have +1/4deg sleeves on both sides, if you need to add 1/2deg of camber you will want to install this 3/4deg camber sleeve. SPC's camber sleeves feature our hex chromate free finish certified to a 700 hour salt spray test. Do you align a lot of Jeeps or are you not sure how much change you will need? Consider SPC's 6 piece set which includes one of each sleeve ranging from 0deg to +1.25deg. P/N 23400 California Residents WARNING
This sleeve will easily change Camber +0.75˚on Jeep Wrangler (JL) models by replacing the camber sleeve that links the upper ball joint to the knuckle. Use the (23409) zero-degree sleeve to determine the amount of change needed and install the correct degree sleeve. Newly assembled Jeeps feature +1/4˚ (+0.25˚) sleeves on both sides from t he factory. All camber sleeves in this series feature a hex-chromate-free finish certified to a 700-hour salt spray test. Consider the (23400) (6) piece set, which includes one of each sleeve available ranging from 0° to +1.25° to ensure complete coverage.
This sleeve will easily change Camber +0.75°on Jeep Wrangler (JL) models by replacing the camber sleeve that links the upper ball joint to the knuckle. Use the (23409) zero-degree sleeve to determine the amount of change needed and install the correct degree sleeve. Newly assembled Jeeps feature +1/4° (+0.25°) sleeves on both sides from the factory. All camber sleeves in this series feature a hex-chromate-free finish certified to a 700-hour salt spray test. Consider the (23400) (6) piece set, which includes one of each sleeve available ranging from 0° to +1.25° to ensure complete coverage.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
Easily change front camber on Jeep Wrangler (JL) models
SPC Performance Jeep 3/4 Deg. Camber Sleeve
Front Adjustment Range: Camber +0.75°
Front Adjustment Range: Camber +0.75˚
SPC 23403 +0.75 CAMBER SLEEVE
3/4deg CAMBER JEEP SLEEVE
Alignment Camber Bushing
3/4 CAMBER JEEP SLEEVE
Required: 1 per wheel
ALIGNMENT BUSHING
CAMBER BSHG
