This sleeve will easily change Camber and/or Caster .25° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change needed and install the correct degree sleeve. To split camber and caster adjustment, rotate sleeve 45°.
This sleeve will easily change Camber and/or Caster .25˚ on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change needed and install the correct degree sleeve. To split camber and caster adjustment, rotate sleeve 45°.
These truck sleeve will correct alignment problems on the F450 and F550 Super Duty trucks with Dana Super 60 solid axles. To split camber and caster adjustment, rotate sleeve 45deg Use the 23239 zero degree sleeve to determine the amount of change needed.California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
Easily change caster / camber or both at the same time
For use on MD Trucks with Dana Super 60 solid axle
Front Adjustment Range: Camber/Caster ±0.25°
Front Adjustment Range: Camber/Caster ±0.25˚
SPC Performance 1/4 deg. FORD SLEEVE
SPC 23231 1/4 CASTER/CAMBER SLEEVE
Alignment Caster / Camber Bushing
Required: 1 per wheel
1/4deg FORD SLEEVE
ALIGNMENT BUSHING
1/4 FORD SLEEVE
ALIGN BUSHNG
