These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45deg. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS. Set 23180 contains 1 each: 23181,23182,23183,23184,23185,23186,23187,23188,23199 California Residents WARNING
These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45°. Save time during alignment, use 23199 zero-degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford and Mazda 4WD light trucks/SUVS. Set 23180 contains 1 each: 23181, 23182, 23183, 23184, 23185, 23186, 23187, 23188, 23199
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
Adjust camber and/or caster 0.25° to 3.5° for RWD and 0.20° to 2.75° for 4WD vehicles with additional series sleeves
Easily adjust caster and/or camber on many Ford and Mazda RWD & 4WD trucks
Front Adjustment Range: Camber/Caster ±0.25° to ±3.50°
Front Adjustment Range: Camber/Caster ±0.25° to ±3.50˚
SPC Performance SET (9) Camber/Caster Sleeve
Kit includes an assortment of (9) sleeves
Recommended Tools: 77880 - Sleeve Puller
SPC 23180 CAM/CAS SLEEVE ASSORTMENT (9)
Alignment Caster / Camber Bushing Kit
23199: RWD 0.00˚ / 4WD 0.00˚
23188: RWD 2.00˚ / 4WD 1.40˚
23187: RWD 1.75˚ / 4WD 1.25˚
23186: RWD 1.50˚ / 4WD 1.10˚
23185: RWD 1.25˚ / 4WD 0.90˚
23181: RWD 0.25˚ / 4WD 0.20˚
23184: RWD 1.00˚ / 4WD 0.75˚
23183: RWD 0.75˚ / 4WD 0.60˚
23182: RWD 0.50˚ / 4WD 0.40˚
23188: RWD 2.00° / 4WD 1.40°
23183: RWD 0.75° / 4WD 0.60°
23182: RWD 0.50° / 4WD 0.40°
23181: RWD 0.25° / 4WD 0.20°
23199: RWD 0.00° / 4WD 0.00°
23187: RWD 1.75° / 4WD 1.25°
23186: RWD 1.50° / 4WD 1.10°
23185: RWD 1.25° / 4WD 0.90°
23184: RWD 1.00° / 4WD 0.75°
CAM/CAST SLEEVE ASSORTMENT (9)
Required: 1 per wheel
ALIGNMENT BUSHING KT
ALIGN BUSHNG
