This sleeve will easily change Camber and/or Caster 1.25˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed and replace the existing sleeve with the correct one. SPC 4169 spanner socket required for sleeve r emoval. Rotate sleeve to further fine tune Camber/Caster adjustment.
This sleeve will easily change Camber and/or Caster 1.25° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed and replace the existing sleeve with the correct one. SPC 4169 spanner socket required for sleeve removal. Rotate sleeve to further fine tune Camber/Caster adjustment.
This sleeve changes camber and caster on many older model trucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169 spanner socket is required for sleeve removal. Rotate sleeve to fine tune camber/caster adjustment. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
Easily adjusts camber / caster in vehicles equipped with DANA 44 or GM 10 bolt axles
Front Adjustment Range: Camber/Caster ±1.25°
Front Adjustment Range: Camber/Caster ±1.25˚
Recommended Tools: 4169 - Spanner Wrench
SPC Performance 1-1/4 deg. 4X4 BUSHING
SPC 23010 1-1/4 CASTER/CAMBER BUSHING
Alignment Caster / Camber Bushing
1-1/4deg CASTER/CAMBER BUSHING
1-1/4 CASTER/CAMBER BUSHING
Required: 1 per wheel
ALIGNMENT BUSHING
ALIGN BUSHNG
