SPC Performance SPC Camber Kit - 83115

To correct camber remove the O.E. lower control arm attaching bolt and move arm away from the bracket. Using 73010 Punch, enlarge the hole in the bracket and re-attach the lower control arm using the correct mm bolt. To adjust, rotate the cam bolt. Note: make sure bolt is long enough before cutting hole. California Residents WARNING

To correct camber remove the O.E. lower control arm attaching bolt and move arm away from the bracket. Using 73010 Punch, enlarge the hole in the bracket and re-attach the lower control arm using the correct mm bolt. To adjust, rotate the cam bolt. Note: make sure bolt is long enough before cutting hole.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Adjust camber 0.75 by removing lower control arm attaching bolt and enlarging hole

Ensure bolt is long enough before cutting

Enlarge hole using SPC 73010 punch

SPC Performance DATSUN CAMBER KIT

SPC 83115 LCA ADJ CAMBER BOLT KIT

Alignment Cam Bolt Kit

DATSUN CAMBER KIT

CAM BOLTS PAIR

CAM BOLT PR