Russell's Full Flow Swivel Hose Ends swivel 360° to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell ProClassic Hose Ends are made from 6061-T6 aluminum and are completely reusable. They feature Russell's proven long taper design ensuring the ease of assembly. AN Standard 37 degree flare design. Russell ProClassic Hose Ends work with all AN Male adapters. Use only with Russell ProClassic hose for best results.
Verify hose series, hose size, AN size, and fitting angle before assembly. Cut hose cleanly, assemble the hose end according to instructions, and confirm the hose is fully seated. After installation, route away from heat, sharp edges, and moving components, then pressure check for leaks.
6AN 2-Piece Straight Swivel Hose End Without Socket With Black Finish
Russell Performance -6 AN Straight Hose End Without Socket - Black
6 AN Straight ProClassic Hose End without Socket Black & Natural
Full Flow Swivel Hose End Straight; -06AN; w/o Socket; Black;
Interchangeable w/Many Manufacturers Ends
For use with Russell ProClassic Hoses
Full Flow Swivel Hose End Straight
Clamp-On Hose Fitting
Russell HOSE END TIP
6061-T6 Aluminum
Hose Fitting
HOSE END TIP
