Russell Full Flow Hose Ends are made from lightweight aluminum and are completely reusable. They feature a unique taper design ensuring easy assembly and also offer 37° angled sealing surface which guarantees a positive anti-leak seal. These Full Flow Hose Ends accepts a wide variety of lightweight aluminum AN style adapter and carburetor fittings. Lastly, these Russell Fittings are interchangeable with many other manufacturers' hose ends.
Russell ProClassic Hose Ends are made from 6061-T6 aluminum and are completely reusable. They feature Russell's proven long taper design ensuring the ease of assembly. AN Standard 37 degree flare design. Russell ProClassic Hose Ends work with all AN Male adapters. Use only with Russell ProClassic hose for best results.
Verify hose series, hose size, AN size, and fitting angle before assembly. Cut hose cleanly, assemble the hose end according to instructions, and confirm the hose is fully seated. After installation, route away from heat, sharp edges, and moving components, then pressure check for leaks.
EFI SAE Female Quick-Disconnect Hose End; 45 Degree; -06AN Hose To 3/8 in. Tube; Red/Blue;
Russell Performance 3/8in SAE Quick Disc Female to -6 Hose Red/Blue 45 Degree Hose End
6AN 45 Degree Female SAE Quick-Disconnect x 3/8" Tube Size WIth Red/Blue Finish
-6 PROCLASSIC 45 DEGREE HOSE END TO 3/8 SAE QUICK DISCONNECT FEMALE RED & BLUE
Interchangeable w/Many Manufacturers AN male adapters
Completely Reusable W Russell Pro Classic Hose
Connects Directly to EFI Quick Disconnect Male
Interchangeable w/Many Manufacturers Ends
EFI SAE Female Quick-Disconnect Hose End
Traditional Red & Blue Anodized Finish
Russell's Proven Long Taper Design
Positive Anti-Leak Seal
Clamp-On Hose Fitting
Russell EFI HOSE END
37 Deg. AN Flare
6061-T6 Aluminum
EFI HOSE END
Hose End
