These Hoses are constructed with a stainless steel outer braid that resists abrasion and corrosion, both have a Chlorinated Polyethylene (CPE) synthetic rubber liner with a nylon inner braid that will not collapse under extreme heat, yet is extremely flexible. Superior ProRace hose has the same features as ProFlex but with a specially formulated CPE synthetic inner liner that is embedded with a partial coverage stainless steel inner braid, then bonded together by a full coverage stainless outer braid for 50% more strength.
Verify hose size, series, pressure rating, and fluid compatibility before assembly. Cut hose cleanly and use only compatible hose ends or clamps. Route away from exhaust heat, sharp edges, ignition sources, and moving components, secure as needed, and pressure check the system for leaks before operation.
These stainless steel braided hoses are constructed with a stainless steel outer braid that resists abrasion and corrosion. The liner is a Chlorinated Polyethylene (CPE) synthetic rubber with a nylon inner braid that will not collapse under extreme heat.
ProFlex Hose; -08AN; 50 ft. Roll; Actual ID 7/16 in.; Nominal ID 0.5 in.; OD 5/8 in.; Max psi 1000;
Russell Performance -8 AN ProFlex Stainless Steel Braided Hose (Pre-Packaged 50 Foot Roll)
8AN Russell ProClassic SS Hose In Pre-Packaged 50 Foot Length
Temperature Range Of -40 Deg. F To 350 Deg. F
For use with Russell ProClassic Hose Ends
Approved By NHRA For Use In Competition
8 AN ProClassic Stainless Hose 50 ft
For use with Fuel, Water, and Oils
Stainless Steel Covering
Russell HOSE
ProFlex Hose
Fuel Hose
Hose
