ProClassic Crimp-On hose ends make custom hose fabrication easy. Simply cut the hose, push together the hose and fitting and crimp! Their lightweight collar design is engineered by size for precise compression ensuring proper end attachment with Russell manual crimper and appropriate crimper die. Replacement collars are available in the event you want to re-use the hose end on a different assembly. They are available in -4 through -12 sizes and are packaged complete with collar. Crimper and dies sold separately.
Verify hose series, hose size, AN size, and fitting angle before assembly. Cut hose cleanly, assemble the hose end according to instructions, and confirm the hose is fully seated. After installation, route away from heat, sharp edges, and moving components, then pressure check for leaks.
Russell Performance -6 AN Proclassic Crimp Straight End (O.D. 0.600) (Qty. 25)
Straight ProClassic Crimp On Hose End; Black/Silver; -6AN; 25 pc.;
- 6 PROCLASSIC CRIMP STRAIGHT HOSE END BLACK & NATURAL 25 PACK
Crimp-On Fittings Are Not Interchangeable W/Other Brands
6AN ProClassic Crimp Straight Hose End - 25 Pack
Straight ProClassic Crimp On Hose End
For use with Russell ProClassic Hoses
Light Weight Crimp Hose End Design
Clamp-On Hose Fitting
Russell HOSE END
Hose Fitting
HOSE END
