QA1 QAP Bump Stops - BAX120

PRODUCT OVERVIEW Changing suspension components in your 1999-2006 Chevrolet Silverado or GMC Sierra 1500 can sometimes cause bump steer or unwanted toe changes during suspension travel. QA1's easy-to-install Bump Steer Kit corrects this problem. ELIMINATE BUMP STEER Bump steer is caused by misalignment in the suspension geometry, leading the wheels to turn slightly in and out as the suspension travels up and down. This can often result from static suspension drops or the use of drop spindles. These direct bolt-in kits relocate the outer tie rod end higher to improve the steering linkage angle through suspension articulation. EASY INSTALLATION The included hardware and stud taper does not require modification and is a no-drill installation. MADE IN THE USA QA1 suspension is proudly made in Lakeville, Minnesota.

A must for trucks with lowered suspension or drop spindles to correct steering linkage angles

QA1 BAX120 Bump Steer Kit, 99-06 Silverado Sierra 2WD

QA1 99-06 Chevy Silverado 1500 2WD Bump Steer Kit

Direct-fit design for easy installation

Steering Bump Steer Assembly

QA1 BAX120 Bump Steer Kit

Proudly made in the USA

QA1 Bump Steer Kit

Bump Steer Kit