The ICON Tubular Rear Track Bar helps center the axle of your lifted 2020-2023 Jeep Gladiator or 2019-2026 Ram 1500 to allow for increased suspension travel and articulation. A massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. ICON’s exclusive rod end Double Adjuster Sleeve allows for fast, easy “on-vehicle” adjustment of track bar length without requiring removal or disassembly of the track bar. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is made of CNC bent 1¼ x .250 wall 1026 DOM tubing with CNC machined threaded end and bushing housing. It has a multi-stage black powder coat finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Upgrading your Jeep Gladiator's rear track bar is a great solution ensure that the Jeep’s axle is properly centered under the vehicle in addition to providing other useful benefits. ICON’s Double Adjuster allows for on vehicle adjustment to streamline the rear-end alignment after installation. A maintenance free, multi-durometer bushing paired with a 3/4” rod end bearing virtually eliminate the deflection that is common in the stock track bar bushings for improved vehicle handling. Overall articulation is also improved by allowing the suspension to cycle fully without binding.
The ICON Tubular Rear Track Bar helps center the axle of your lifted 2020-2023 Jeep Gladiator or 2019-2026 Ram 1500 to allow for increased suspension travel and articulation.
Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness
“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
APPLICATION NOTE #660: Compatible with 0-2" of rear lift on most Jeep Gladiator submodels
APPLICATION NOTE #657: Compatible with 0-2.5" of rear lift on 2019-2026 Ram 1500 Rebel
APPLICATION NOTE #661: Compatible with 0-3" of rear lift on most Ram 1500 submodels
Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing
On vehicle adjustable for precise track alignment using ICON’s Double Adjuster
Dual stage powder coat finish provides excellent corrosion resistance
APPLICATION NOTE #131: Will not fit 2019-2024 Ram 1500 Classic models
APPLICATION NOTE #105: Not for vehicles with rear factory air ride
APPLICATION NOTE #184: Will not fit Ram 1500 TRX or Ram 1500 RHO
Easy install into OEM mounts w/ application specific hardware
2020-UP JEEP GLADIATOR JT REAR ADJUSTABLE TRACK BAR KIT
Allows for full suspension articulation without binding
20-23 JEEP JT/19-26 RAM 1500 REAR ADJ TRACK BAR KIT
ICON 2020+Jeep JT Rear Adj Track Bar Kit
GLADIATOR REAR ADJ TRACK BAR KIT
20-UP JT REAR ADJ TRACK BAR KIT
Suspension Track Bar
JT REAR TRACK BAR
TRACK BAR KIT
22068
