Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front lift includes the Dirt Logic 4.0 Stainless Steel Coilover Shock conversion and rear 2.25 Dirt Logic Stainless Steel shocks. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, U-bolt kit, and replacement rear Leaf Springs.
Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
TIRE SIZE - 37/13.50R20 Wheel - 20X10 W/4 1/2" BS W/MINOR TRIMMING; TIRE SIZE - 355/65R18 Wheel - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; NON DUALLY MODELS ONLY.; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.; 29. REAR SPRINGS MAY REDUCE LOAD CARRYING CAPACITY.
Fabtech 08-10 Ford F250/350 4WD 8in Rad Arm Sys w/Dlss 4.0 C/O& Rr Dlss
8" RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 08-10 FORD F250/350 4WD.
8" RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 08-10 FORD F250/350 4WD
Radius Arm Lift System; w/DLSS Shocks; 8 in. Lift;
Adjustable Alignment Cam Allows Caster Adjustment
Unsurpassed Strength And Performance
Fabtech-8" RAD ARM SYS W/DLS
Patent Pending Radius Arms
Fully Tubular Structure
Radius Arm Lift System
Dimple Die Side Plates
8" RAD ARM SYS W/DLS
Suspension Lift Kit
LftKt-Suspw/Shock
