Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift includes the Dirt Logic 4.0 Stainless Steel Coilover Shock conversion. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, rear Add-a-leafs, and a Block & U-bolt kit. Includes rear 2.25 Dirt Logic Stainless Steel shocks.
Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
TIRE SIZE - 37/13.50R20 Wheel - 20X10 W/4 1/2" BS W/MINOR TRIMMING; TIRE SIZE - 355/65R18 Wheel - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.
Fabtech 08-10 Ford F250 4WD w/o Factory Overload 8in Rad Arm Sys w/Dlss 4.0 C/O& Rr Dlss
8" RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 08-10 FORD F250 4WD W/O FACTORY OVERLOAD.
8" RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 08-10 FORD F250 4WD W/O FACTORY OVERLOAD
Radius Arm Lift System; w/DLSS Shocks; 6 in. Lift; w/o Factory Overload;
Adjustable Alignment Cam Allows Caster Adjustment
Unsurpassed Strength And Performance
Fabtech-8" RAD ARM SYS W/DLS
Patent Pending Radius Arms
Fully Tubular Structure
Radius Arm Lift System
Dimple Die Side Plates
8" RAD ARM SYS W/DLS
Suspension Lift Kit
LftKt-Suspw/Shock
