The 8" Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4" thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech’s combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37" tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech’s optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4" block kit with 2" add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket.
Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
The 8" Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4" thick, high arched lower control arm crossmembers with tubular upper control arms
Performance Lift System w/Shocks; w/Stealth Monotube Shocks; 8 in. Lift;
2001-06 CHEVY SILVERADO 2500HD/3500HD | GMC SIERRA 2500HD/3500HD 2WD/4WD
Chevrolet, GMC (6.0, 6.6, 8.1) 8" Performance Suspension Lift Kit
Fabtech 01-06 GM C/K2500HD 8in Perf Sys w/Stealth
Heavy Duty 1/4" Thick, High Arched Crossmember
Everything You Will Need To Lift Your Vehicle
No Driveshaft Change Required For Auto Trac
FABTECH PN K1015M 8" SYSTEM CHEVY 2/3500
Allows Use Of Stock Tires And Wheels
Retains Factory Steering Centerlink
Retains Factory Upper Control Arms
Increased Caster For More Control
Performance Lift System w/Shocks
Ductile Iron Steering Knuckles
New Tubular Upper Control Arms
Front Differential Skid Plate
Quick No Weld Installation
Torsion Bar Drop Brackets
Billet Sway Bar End Links
Rear Block & U-bolt Kit
Suspension Lift Kit
LftKt-Suspw/Shock
Rear Add-a-leaf
FABTECH K1015M
Impact Struts
