Fabtech's JL Crawler long arm systems are built to meet the most experienced driver's expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawler's 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2 in. OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech's legendary 5 Ton joints(R) that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.
FrontandRear Corner Specific Dual Rate Coil Springs
Fabtech 18-21 Jeep JL 4-Door 3in Crawler w/Stealth
Crawler Lift Kit; 3 in. Crawler; w/ Stealth;
Front Link Arm Crossmember And Skid Plate
FABTECH PN K4131M 3" CRAWLER LONG ARM
FrontandRear Stealth Monotube Shocks
Front And Rear Bump Stop Extensions
FrontandRear Lower 5 Ton Link Arms
FrontandRear Track Bar Bracket
FrontandRear Brake Line Drops
FrontandRear Sway Bar Links
Heavy Duty Flipped Draglink
Rear Lower Link Arm Mounts
Front Shock Mount Brackets
Suspension Lift Kit
LftKt-Suspw/Shock
Crawler Lift Kit
