Edelbrock EDE Victor Intake Manifold - 28002

Edelbrock part #28002 Big Victor 2 Spread-Port Tall-Deck intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.

28070; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Single-Plane; Tunnel-Ram; Cross-Ram; Performer; Performer RPM; Victor JR.; Super Victor; Victor; Dual-Quad; Slingshot; Satin

Edelbrock Manifold Big Victor II BBC w/ Edelbrock Profiler or Dart Big Chief Heads Dominator Flange

Edelbrock Big Victor 2 Spread-Port Tall Deck Intake Manifold for Big-Block Chevrolet

Big Victor 2 Spread-Port; Tall Deck Intake Manifold for Big-Block Chevy

Big Victor 2 Spread-Port, Tall Deck Intake Manifold for Big-Block Chevy

MANIFOLD; BBC TALL DECK; BIG VICTOR 2; SPREAD PORT; 4500 FLANGE

Use Appropriate 4500-Series Carburetor

Big Victor 2 Intake Manifold

Chevrolet:Big-Block Race

Engine Intake Manifold

Big Victor 2 10.2 Deck

MANIFOLD-RACE

Intake Mnfld

{ eo : 2in.}