Edelbrock part #5076 Torker II intake manifold is designed for high Performance's street 340-360 c.i.d. Chrysler V8's. Manifold not equipped with EGR. Can be used on 318 c.i.d. if 340-360 c.i.d. cylinder heads are used. Will not fit 1992 and later Magnum engines. Not for heavy vehicles (trucks, vans etc.); use Performer #2176 intake manifold.
Edelbrock part #5076 Torker II intake manifold is designed for high Performance's street 340-360 c.i.d. Chrysler V8's. Manifold not equipped with EGR. Can be used on 318 c.i.d. if 340-360 c.i.d. cylinder heads are used. Will not fit 1992 and later Magnum engines. Not for heavy vehicles (trucks, vans etc.)
Edelbrock; SBC Head; 210-Series Cylinder Head E-210 Flat Tappet Camshaft. Capable of supporting more than 500; V8; Cylinder Heads; 5085; Early Model
Edelbrock Torker II Intake Manifold for 318-360 Chrysler Small Block LA engines
Torker II 340/360 Small Block Chrysler Intake Manifold
Chrysler:Small-Block:318 (5.2L)/340 (5.6L)/360 (5.9L)
Can be Used on 318 cid if 340/360 Heads Used
MANIFOLD; 1967-91 CHRYS 318-360; TORKER II
Torker 2 Chrysler 360 Intake Manifold
use Performer #2176 intake manifold.
Torker II 340/360 Intake Manifold
Edelbrock Torker II 360 Manifold
Engine Intake Manifold
Intake Mnfld
{ eo : 5in.}
MANIFOLD
