Edelbrock part #5001 Torker II intake manifold is designed for 1955-86 high-performance's street 262-400 c.i.d. small-block Chevys. This Torker manifold is a singe plane low rise intake that's great for high performance applications that have limited hood clearance. The manifold has an exhaust crossover for easy cold weather warm-ups, but no provisions for exhaust heated chokes or EGR. Customers will need either electric or manual choke carburetors. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Intake manifold will fit Corvette and '87 and later stock heads. Will not fit '87 and later cast iron heads and will not cover port openings of Chevrolet Bowtie or LT1 heads. Not for heavy vehicles (trucks, vans etc.); use Performer EPS #2701.
Edelbrock part #5001 Torker II intake manifold is designed for 1955-86 high-performance's street 262-400 c.i.d. small-block Chevys. This Torker manifold is a singe plane low rise intake that's great for high performance applications that have limited hood clearance. The manifold has an exhaust crossover for easy cold weather warm-ups, but no provisions for exhaust heated chokes or EGR. Customers will need either electric or manual choke carburetors. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Intake manifold will fit Corvette and '87 and later stock heads. Will not fit '87 and later cast iron heads and will not cover port openings of Chevrolet Bowtie or LT1 heads. Not for heavy vehicles (trucks, vans etc.)
Edelbrock Torker II Intake Manifold For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Edelbrock; Jeep; 4.0L;1987-2006; Cylinder Heads; 50159
Not for 1987 and Later Stock Aluminum Heads
Torker II Intake Manifold Small-Block Chevy
MANIFOLD; 1955-86 SB CHEVY; TORKER II
Torker II Series Intake Manifold
Torker 2 SBC Intake Manifold
Edelbrock Torker II Manifold
use Performer EPS #2701.
Engine Intake Manifold
Intake Mnfld
{ eo : 7in.}
MANIFOLD
