The Edelbrock 3849 Intake elbows was developed by the Edelbrock engineering team using the latest in Computational Fluid Dynamic (CFD) software. Edelbrock Throttle Body Elbows are the best way to adapt LS1, LS2 and Ford 5.0L-based throttle bodies to EFI manifolds with traditional square-bore mounting pads. An internal divider optimizes flow quantity and distribution into the manifold and they can be mounted forward, backward, or sideways on Victor EFI square-bore manifolds. Three versions allow EFI tuners to position the throttle body low for hood clearance or higher for maximum airflow. Available in satin or black powder coated finish. All Edelbrock Throttle Body Elbows include a universal throttle cable bracket. High Flow Intake Elbow 3849 can be used with up to a 95mm Throttle Body.
These elbows were developed by the Edelbrock engineering team using the latest in Computational Fluid Dynamic (CFD) software. High Flow Intake Elbow 3849 can be used with up to a 95mm Throttle Body.
Edelbrock #3853; 29#; 29 Lb/hr; Fuel Injector; Injector; Injection; EFI; Electronic Fuel Injector; Electronic Fuel Injection; ProFlo; ProFlo2; ProFloXT; ProFlo3; ProFlo4; ProFlo EFI
Edelbrock High Flow Intake Elbow 95mm Throttle Body to Square-Bore Flange As-Cast Finish
Throttle Body Intake Elbow #3849 High Flow; 90mm Opening; Satin Finish
Throttle Body Intake Elbow #3849 High Flow, 90mm Opening, Satin Finish
EFI ELBOW UNIVERSAL 95MM TB TO 4150 FLANGE TALL PROFILE
High Flow Intake Elbow (up to 95mm Throttle Body)
Edelbrock Throttle Body Intake Elbows
Engine Air Intake Deceleration Elbow
High Flow Intake Elbow
FUEL INJECTION COMPO
Satin Finish
Intake Elbow
{ eo : 2in.}
