The Edelbrock 3814 Intake elbow was developed by the Edelbrock engineering team using the latest in Computational Fluid Dynamic (CFD) software. Edelbrock Throttle Body Elbows are the best way to adapt LS1, LS2 and Ford 5.0L-based throttle bodies to EFI manifolds with traditional square-bore mounting pads. An internal divider optimizes flow quantity and distribution into the manifold and they can be mounted forward, backward, or sideways on Victor EFI square-bore manifolds. Three versions allow EFI tuners to position the throttle body low for hood clearance or higher for maximum airflow. Available in satin finish. All Edelbrock Throttle Body Elbows include a universal throttle cable bracket. Elbow #3814 has universal bolt pattern to adapt a single TB (Up to a 95mm) to a 4500 flange
These elbows were developed by the Edelbrock engineering team using the latest in Computational Fluid Dynamic (CFD) software. Elbow #3814 has universal bolt pattern to adapt a single TB (Up to a 95mm) to a 4500 flange
Edelbrock #3818; 90mm; ProFlo XT; SBF XT; ProFlo SBF; SBF; 289; 302; 331; 347; Small-Block Ford; Small-Block Ford 5.0; SBF EFI; SBF Throttle Body; Ford 5.0; Ford 5.0 Throttle Body; ProFlo #3520
Edelbrock EFI Intake Elbow Universal 100 Deg 95mm T B to 4500 Dominator Flange Tall Profile
High Flow Intake Elbow for adapting a single TB to a 4500 flange (Universal)
Throttle Body Intake Elbow #3814 High Flow; 95mm Opening; Satin Finish
Throttle Body Intake Elbow #3814 High Flow, 95mm Opening, Satin Finish
EFI INTAKE ELBOW TALL 100 DEG 95MM T.B. TO 4500 DOMINATOR FLANGE
Edelbrock Throttle Body Intake Elbows
Engine Air Intake Deceleration Elbow
Up To 95 mm. Throttle Body
High Flow Intake Elbow
FUEL INJECTION COMPO
Intake Elbow
{ eo : 2in.}
