Edelbrock Rollin' Thunder Camshaft #2204 is designed for 283-400 Chevy V8 engines from 1987-Later (Non LT1/Gen III) and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 435HP and 435 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813 and Performer RPM E-Tec cylinder heads #60795. Use with high stall torque converter and stock ratio rocker arms only. Camshaft specifications: - Intake duration: 234 Degrees - Exhaust duration: 238 Degrees - Intake lift: .539" - Exhaust lift: .548" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 12"
Edelbrock Rollin' Thunder Camshaft #2204 is designed for 283-400 Chevy V8 engines from 1987-Later (Non LT1/Gen III) and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 435HP and 435 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813 and Performer RPM E-Tec cylinder heads #60795. Use with high stall torque converter and stock ratio rocker arms only.Camshaft specifications:- Intake duration: 234 Degrees- Exhaust duration: 238 Degrees- Intake lift: .539"- Exhaust lift: .548"- Lobe separation: 112 Degree- Intake Center Line: 107 Degree- Vacuum: 12"
Edelbrock Rollin' Thunder Camshaft #2204 is designed for 283-400 V8 Chevy engines from 1987-Later (Non LT1/Gen III) and produces optimum torque from the low-end to the mid-range.
Edelbrock; Performer; RPM; Camshaft; Engine; V8; Cam; Rollin Thunder;?2205; 283-400; 1987-Later; Chevy
Performer-RPM Camshaft for 1987-Later S/B Chevy 283-400 V8 Non LT1 / NON Gen III
Edelbrock Rollin' Thunder Camshaft for 1987-Later 283-400 Non LT1 / Non Gen III
Performer-RPM Camshaft for 1987-Later S/B Chevy 283-400 V8 Non LT1/NON Gen III
Edelbrock Rollin Thunder Camshaft for 1987-Later 283-400 Non LT1/Non Gen III
Edelbrock RPM Hydraulic Roller Cam Only 283-400 Chevy 87-99
Edelbrock Rollin' Thunder camshaft #2204
Edelbrock Rollin Thunder camshaft #2204
Chevrolet:Small-Block Gen I:350 (5.7L)
Use Only Stock Ratio Rocker Arms
Rollin Thunder Camshaft
Engine Camshaft
SBC Camshaft
{ eo : 5in.}
CAMSHAFTS
