3/S Getrag Bearing Shims
- Additional information
These are no longer available from Mitsubishi/Getrag. We have worked with a partner in Sweden to procure these from a bearing manufacturer. These may have slightly different inside diameters than the originals, but this is not cause for concern. These have the same outside diameter and are available in .1mm, .2mm, and .5mm thicknesses, so that you may get your bearing pre-load perfect.
We have a fairly limited supply of these and also need these for our rebuilds, but they are all in stock at this time. If you need a larger quantity of these please contact us for information. We reserve the right to limit the number of these purchased per customer/order.
Please carefully measure the outside diameter of your shim to be sure you have the correct one selected.
These are priced by 1 shim. Simply order as many and as many different types as you need.
|Dimensions||4 × 4 × 1 in|
5 Speed, 6 Speed
Countershaft Bellhousing Side, Front Diff Bellhousing, Front Pinion Bellhousing, Center Diff Midcase, End Case Input Bearing
.1mm, .2mm, .5mm