Sale!
brand:

EBC S1 Kits Ultimax Pads & RK rotors

$176.97

-

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking
Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
Front S1K FMSI D1160 2005 thru 2011 CHEVROLET HHR 2.4

Out of stock

SKU: ebcS1KF1571 Category:

Description

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking
Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
Front S1K FMSI D1160 2005 thru 2011 CHEVROLET HHR 2.4

Additional information

air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Unknown

epa

N/A

brand

EBC