FIC 1650cc Fuel Injector Install for the 3000GT and Dodge Stealth

FIC 1650cc Fuel Injector Install for the 3000GT and Dodge Stealth

Today we are in part 2 of our FIC 1650cc Injector series. In part one we did an unboxing video. In part two we will show how to install these FIC 1650s, or any fuel injector in a 3000GT or Dodge Stealth.

This video may also be helpful for those wanting to replace the spark plugs or wires on a 3/S or even to run a compression check. One of the major steps is removing the intake plenum, which is common to many 3000GT maintenance procedures.

For this process you will need approximately the following tools:

  • 3/8 Drive Ratchet
  • 3/8 Drive torque wrench would be nice to have, plenum bolts are 13 ft/lbs.
  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket if you have any aftermarket bolts.
  • Allen sockets if you have any allen bolts.
  • A small quantity of motor oil
  • Clean shop rags

We hope you enjoy our video!

Share this post